Machinery (other than machines of heading 8450) for washing, cleaning, wringing, drying, ironing, pressing (including fusing presses), bleaching, dyeing, dressing, finishing, coating or impregnating textile yarns, fabrics or made up textile articles and machines for applying the paste to the base fabric or other support used in the manufacture of floor coverings such as linoleum; machines for reeling, unreeling, folding, cutting or pinking textile fabrics; parts thereof:

Ironing machines and presses (including fusing presses)

Cereal straw and husks, unprepared, whether or not chopped, ground, pressed or in the form of pellets

Acid black 210 powder and presscake

Isoindolenine red pigment; Pigment red 214, 242, 254; Pigment red 149 dry and pigment red 149 presscake; and Pigment yellow 155, 183

Pigment blue 15:3, dry, presscake or aqueous slurry

Pigment red 57:1, dry, presscake or aqueous slurry

Pigment yellow 12, dry, presscake or aqueous slurry

Flexible tubes, pipes and hoses, having a minimum burst pressure of 27.6 MPa

High pressure paper reinforced decorative laminates

Molded or pressed articles of paper pulp

Filtering or straining cloth of a kind used in oil presses or the like, including that of human hair

Paving blocks, slabs, bricks, squares, tiles and other articles of pressed or molded glass, whether or not wired, of a kind used for building or construction purposes; glass cubes and other glass smallwares, whether or not on a backing, for mosaics or similar decorative purposes; leaded glass windows and the like; multicellular or foam glass in blocks, panels, plates, shells or similar forms:

Paving blocks, slabs, bricks, squares, tiles and other articles of pressed or molded glass

Refillable stainless steel kegs, whether or not pressurized, of a kind described in statistical note 1 to this chapter.

Refillable stainless steel kegs, whether or not pressurized, of a kind described in statistical note 1 to this chapter

Refillable stainless steel kegs, whether or not pressurized, of a kind described in statistical note 1 to this chapter

Interchangeable tools for handtools, whether or not power operated, or for machine-tools (for example, for pressing, stamping, punching, tapping, threading, drilling, boring, broaching, milling, turning or screwdriving), including dies for drawing or extruding metal, and rock drilling or earth boring tools; base metal parts thereof:

Tools for pressing, stamping or punching, and parts thereof:

Steam or other vapor generating boilers (other than central heating hot water boilers capable also of producing low pressure steam); super-heated water boilers; parts thereof:

Double-width newspaper printing presses

Machinery (other than machines of heading 8450) for washing, cleaning, wringing, drying, ironing, pressing (including fusing presses), bleaching, dyeing, dressing, finishing, coating or impregnating textile yarns, fabrics or made up textile articles and machines for applying the paste to the base fabric or other support used in the manufacture of floor coverings such as linoleum; machines for reeling, unreeling, folding, cutting or pinking textile fabrics; parts thereof:

Ironing machines and presses (including fusing presses)

Of machines for washing, dry-cleaning, ironing, pressing or drying made up textile articles or of other household or laundry type machines

Machine-tools (including presses) for working metal by forging, hammering or die forging (excluding rolling mills); machine-tools (including presses, slitting lines and cut-to length lines) for working metal by bending, folding, straightening, flattening, shearing, punching, notching or nibbling (excluding draw-benches); presses for working metal or metal carbides, not specified above:

Mechanical transfer presses

Mechanical transfer presses

Numerically controlled press brakes

Hydraulic presses:

Mechanical presses:

Parts of mechanical transfer presses

Parts of mechanical transfer presses

Cold isostatic presses

Of presses for the manufacture of particle board or fiber building board of wood or other ligneous materials and other machinery for treating wood or cork

Taps, cocks, valves and similar appliances, for pipes, boiler shells, tanks, vats or the like, including pressure-reducing valves and thermostatically controlled valves; parts thereof:

Having a pressure rating under 850 kPa

Having a pressure rating of 850 kPa or over

Regulator valves, self-operating, for controlling variables such as temperature, pressure, flow and liquid level

Hot isostatic presses

Basal metabolism and blood pressure apparatus

Instruments and apparatus for measuring or checking the flow, level, pressure or other variables of liquids or gases (for example, flow meters, level gauges, manometers, heat meters), excluding instruments and apparatus of heading 9014, 9015, 9028 or 9032; parts and accessories thereof:

For measuring or checking pressure:

Boltless or press-fit steel shelving units prepackaged for sale as described in statistical note 2 to this chapter

Buttons, press-fasteners, snap-fasteners and press-studs, button molds and other parts of these articles; button blanks:

Press-fasteners, snap-fasteners and press-studs and parts thereof:

Braille tablets, cubarithms, and special apparatus, machines, presses, and types for their use or benefit exclusively

Sets of coasters of glass, not pressed or toughened (specially tempered), each printed with a cross-sectional image of an object after formation of the glass which, when the coasters in any set are stacked, depict a three-dimensional image of such object; each coaster with attached protective rubber feet and valued over $0.30 each but not over $3 each (provided for in subheading 7013.99.50)

Vases of blown glass, not pressed or toughened (specially tempered), with blown-in color, the foregoing with no decoration from glass, metal flecking, pictorial scenes or thread- or ribbon-like effects embedded or introduced into the body of such goods prior to solidification; measuring at least 15.2 cm but not over 20.4 cm in height, with an opening at least 11.4 cm but not more than 12.7 cm wide, valued not over $3.00 each; presented without seeds or stones (provided for in subheading 7013.99.50)

Vases of blown glass, not pressed or toughened (specially tempered), with blown-in color, the foregoing with no decoration from glass, metal flecking, pictorial scenes or thread- or ribbon-like effects embedded or introduced into the body of such goods prior to solidification; measuring over 20.4 cm but not over 25.4 cm in height, with an opening at least 11.4 cm but not more than 12.7 cm wide, valued not over $3.00 each; presented without seeds or stones (provided for in subheading 7013.99.50)

Side press wringer handles of steel (provided for in subheading 7326.90.86)

Economizers comprising auxiliary plant for use with boilers of heading 8402, with a pressure capacity of 10686.87 kPa, certified by the importer as for use in the pulp and paper industry (provided for in subheading 8404.10.00)

Fuel-injection pumps, designed for compression-ignition engines having an output of 1000 kW or greater, each pump weighing 60 kg or more and capable of generating a pressure greater than 1200 bar, such pumps designed for use in a common rail fuel system (provided for in subheading 8413.30.10), the foregoing other than used goods

High pressure fuel pumps, each incorporating a default open or closed solenoid valve, certified by the importer to be used in regulating the fuel supply into the fuel rail, designed for use in gasoline direct injection (GDI) spark-ignition internal combustion piston engines (provided for in subheading 8413.30.90); the foregoing other than used goods

Drill presses, valued under $1,000 each (provided for in subheading 8465.95.00)

Valve-type fuel injectors, each functional in a common rail fuel system with a pressure greater than 120 Mpa (1200 bar) (provided for in subheading 8481.80.90), the foregoing other than used goods

Used self-operating regulator valves, such valves designed for controlling variables such as temperature, pressure or flow (provided for in subheading 8481.80.90)

Fuel Injectors, other than used, each incorporating a valve and a micro-stamped orifice hole, certified by the importer as designed to deliver fuel to the combustion chamber of a gasoline engine with a pressure not exceeding 120 Mpa (1200 bar) (provided for in subheading 8481.80.90)

Valves, capable of operating at pressures of 68.94 MPa or more (provided for in subheading 8481.80.90), for controlling production flow through a subsea tree, each mounted in a module that can be removed and replaced by a remotely operated underwater vehicle (ROV)

Parts of signaling equipment, each with pressed sealing on the flanges (provided for in subheading 8512.90.20)

Electrothermic pressure cookers of a kind used for domestic purposes, with a capacity of not less than 5 liters, rated more than 1000 W but not more than 1200 W (provided for in subheading 8516.79.00)

Electrothermic pressure cookers of a kind used for domestic purposes, each with a capacity of not less than 5 liters and rated more than 1200 W but not more than 1400 W (provided for in subheading 8516.79.00)

Electrothermic pressure cookers of a kind used for domestic purposes, each with a capacity of less than 5 liters and rated from 800 W to 1000 W (provided for in subheading 8516.79.00)

Emergency lights, of base metal other than of brass, round or elongated in shape, measuring between 6 and 12 cm in height, each containing incandescent lamp, lamp holder, reflector, clear glass lens with drain hole, pressure can and electrical pigtail with connector; the foregoing configured to be mounted to the exterior of an aircraft and designed for illuminating egress paths on or around the aircraft during an emergency evacuation (provided for in subheading 9405.40.60)